F9E2 Whirlpool Dishwasher Error Code

Inspect first

What does F9E2 mean?

Drain motor error. Whirlpool lists drain-path checks (disposer knockout, clogs, kinked hose, hose routing), then a power cycle; service if it returns.

Common causes

The manufacturer support page points to these conditions for this code:

  • A kinked, bent, or pinched hose
  • A blocked, kinked, or incorrectly installed drain hose or standpipe
  • Debris or a blockage in the water path
  • A pump or motor that is not turning freely

What to check first

  1. Make sure the garbage disposer knockout plug was removed (new installation);
  2. check the disposer and drain for clogs;
  3. straighten a kinked drain hose;
  4. verify the drain hose is routed correctly;
  5. then power-cycle for 30 seconds.

When to call a professional

If the error code returns after the power cycle / checks above, schedule service.

Official source

This explanation follows the manufacturer support page: F9E2 - Dishwasher.

If you see water on the floor, smell burning, or the official page says to call service, stop and contact the manufacturer or a qualified technician.