Samsung Error Codes
Explanations follow official Samsung support pages.
Samsung dishwasher codes
- 1CThe dishwasher fails to start or stops early and keeps trying to drain even when there is basically no water inside (low-water-level condition).
- 4CThe dishwasher is not getting water at the pressure or temperature it needs (water supply error).
- 4C5The dishwasher starts, attempts to fill, then stops early with a dry tub - a water supply pressure or delivery fault.
- 5CThe dishwasher cannot drain (drain error). Samsung Dishwasher code 5C: what the manufacturer says to check and when to call service.
- 5C2The dishwasher attempts to drain but the pump either fails to start, runs only briefly, or stalls.
- ACThe dishwasher powers on but won't start or run cycles, may stop mid-cycle and become unresponsive.
- DCThe dishwasher powers on but won't start or stops shortly after pressing Start (door-related fault).
- HC4The wash may complete but drying fails or ends early, with unusually hot air at the door vent just before stopping and beeping.
- LCThe leak sensor has detected moisture; the dishwasher turns itself on, will not turn off, and keeps trying to drain the water away.
- OCThere is more water in the dishwasher than there should be (over-level / overflow error).
Samsung washer codes
- 4ENot filling error - water is not entering the washer correctly. Samsung Washer code 4E: what the manufacturer says to check and when to call service. · also 4C, NF, 14C
- 5ENo drain error - water is not draining from the washer at the correct speed (or at all). Also shown as 5C, ND. · also 5C, ND
- D5Door error - the door is not detected as closed and locked. Samsung Washer code D5: what the manufacturer says to check and when to call service. · also 1DC, 1DC1, 1DC4
- DCDC: Unbalanced load error - the current load in the washer is unbalanced inside the tub; Ur (unbalanced load retry) means the washer will add water.
- DC3Add Door error - the Add Door is not detected as closed and locked. Samsung Washer code DC3: what the manufacturer says to check and when to call service.
- DDCAdd Door error - the Add Door is not detected as closed and locked. Samsung Washer code DDC: what the manufacturer says to check and when to call service.
- DEDoor error - the door is not detected as closed and locked. Samsung Washer code DE: what the manufacturer says to check and when to call service. · also DC1, DE1
- DE2Door error - the door is not detected as closed and locked. Samsung Washer code DE2: what the manufacturer says to check and when to call service.
- E3Motor error - no specific troubleshooting is listed on the page; follow the basic steps.
- LEWater level or leakage error - moisture is detected somewhere it should not be, or there is an issue with the water level sensor. · also 1C, 11C, 1E
- OEOverflow error - there is too much water in the washer. Samsung Washer code OE: what the manufacturer says to check and when to call service. · also 0C, 0E, 10C
- OFOverflow error. Samsung Washer code OF: what the manufacturer says to check and when to call service.
- SENo drain error - water is not draining from the washer at the correct speed (or at all). Also shown as 15C, SC. · also 15C, SC
- SUDExcessive suds error - the washer detected an over-sudsing condition and stops briefly to let the suds dissipate. · also 5D, 5UD, 5UD5
- UEUnbalanced load error - the current load in the washer is unbalanced inside the tub; Ur (unbalanced load retry) means the washer will add water. · also UB, U6, UR