F9E1 Whirlpool Washer Error Code

Also shown as: DRN

DIY

What does F9E1 mean?

The washer is unable to drain correctly (long drain time).

Common causes

The manufacturer support page points to these conditions for this code:

  • A blocked or dirty filter
  • A blocked, kinked, or incorrectly installed drain hose or standpipe
  • Debris or a blockage in the water path

What to check first

  1. Check the drain hose installation and that it does not extend more than about 4.5” (113 mm) into the standpipe;
  2. clean the drain pump filter and door seal/bellow if clogged.

Safety

  • Unplug the appliance before opening the filter, pump cover, or drain area, and expect water to come out.
  • Unplug the appliance before draining water, and keep the water away from the power supply.

When to call a professional

If the washer still will not drain, service is needed.

Official source

This explanation follows the manufacturer support page: F9 E1 - Front Load Washer.

If you see water on the floor, smell burning, or the official page says to call service, stop and contact the manufacturer or a qualified technician.