OE Samsung Washer Error Code

Also shown as: 0C, 0E, 10C, 1OC, OC

DIY

Overflow error.

What does OE mean?

There is too much water in the washer.

Common causes

The manufacturer support page points to these conditions for this code:

  • A blocked or dirty filter
  • A kinked, bent, or pinched hose
  • A blocked, kinked, or incorrectly installed drain hose or standpipe
  • Water collecting where it should not be (a leak or the base tray filling)

What to check first

  1. Follow the no-drain checks: make sure the washer is level, the drain hose is not kinked and is at the correct height, and (front loaders) clean the drain pump filter;
  2. then run a cycle to confirm the washer drains.

Safety

  • Unplug the appliance before opening the filter, pump cover, or drain area, and expect water to come out.

When to call a professional

If the washer still does not drain during a test cycle, request service.

Official source

This explanation follows the manufacturer support page: Samsung washing machine information and error codes.

If you see water on the floor, smell burning, or the official page says to call service, stop and contact the manufacturer or a qualified technician.