4E Samsung Washer Error Code

Also shown as: 4C, NF, 14C

DIY

Not filling error.

What does 4E mean?

Water is not entering the washer correctly.

Common causes

The manufacturer support page points to these conditions for this code:

  • A blocked or dirty filter
  • A kinked, bent, or pinched hose
  • A water valve or tap that is not fully open
  • Debris or a blockage in the water path

What to check first

  1. Make sure the hot and cold supply hoses are connected to the correct inlets (hot to hot, cold to cold) and are not bent or kinked;
  2. open the water valves completely;
  3. check the drain hose is inserted 6-8 inches into the drain pipe and is not kinked;
  4. unplug the washer or trip the circuit breaker for 1 minute, then retry;
  5. if debris is suspected, close the valves, disconnect the hoses, and clean the filters inside the washer’s water connections.

When to call a professional

If the code continues, request service.

Official source

This explanation follows the manufacturer support page: Samsung washing machine information and error codes.

If you see water on the floor, smell burning, or the official page says to call service, stop and contact the manufacturer or a qualified technician.