IE LG Washer Error Code

DIY

Water Inlet Error.

What does IE mean?

United States

The tub did not fill to an adequate water level within the set time. Causes include the water supply being off, the faucet closed, the supply hose disconnected, pressed or bent, or the hose frozen in cold weather.

United Kingdom

Inlet error: the tap may be turned off, the water supply hose may be kinked, or the inlet filter may be blocked, preventing the machine from filling properly.

Common causes

The manufacturer support page points to these conditions for this code:

  • A blocked or dirty filter
  • A kinked, bent, or pinched hose
  • A water valve or tap that is not fully open
  • A frozen water line, hose, or drain

What to check first

  1. Check that the supply hose is connected to the faucet and the faucet is fully open;
  2. unfold/straighten a bent supply hose;
  3. if frozen, thaw the faucet with a warm towel for 5 minutes and the hose in warm water of 50C or lower;
  4. clean the inlet filter screen.

Safety

  • Unplug the appliance before opening the filter, pump cover, or drain area, and expect water to come out.

When to call a professional

If the same error code keeps appearing after troubleshooting, unplug the washing machine and contact LG Support.

Official source

This explanation follows the manufacturer support page: LG Front Load Washer - Error Code List(New).

If you see water on the floor, smell burning, or the official page says to call service, stop and contact the manufacturer or a qualified technician.