SE Samsung Washer Error Code

Also shown as: 15C, SC

DIY

No drain error.

What does SE mean?

Water is not draining from the washer at the correct speed (or at all).

Common causes

The manufacturer support page points to these conditions for this code:

  • A blocked or dirty filter
  • A kinked, bent, or pinched hose
  • A blocked, kinked, or incorrectly installed drain hose or standpipe

What to check first

  1. Check the washer is level;
  2. verify the drain hose is inserted 6-8 inches into the standpipe or sink, is not kinked/bent, and is at the correct height (at least 18 inches high, no higher than 96 inches);
  3. front loaders: clean the drain pump filter;
  4. then run a cycle to confirm it drains.

Safety

  • Unplug the appliance before opening the filter, pump cover, or drain area, and expect water to come out.

When to call a professional

If the washer still does not drain during a test cycle, request service.

Official source

This explanation follows the manufacturer support page: Samsung washing machine information and error codes.

If you see water on the floor, smell burning, or the official page says to call service, stop and contact the manufacturer or a qualified technician.